Parts

The Flash I is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Double bushing spindle, 52.5mm - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included

There’s no need to choose between clipless performance and platform versatility with iSSi's Flip II pedals. Go clipless on the commute or sport clogs on campus. - Flip II: 56.5mm spindle length - Wear 2-bolt style cycling shoes or casual flat shoes - Compatible with iSSi, Shimano SPD, and Wellgo 98A cleats - Chromoly spindle, ED-coated - Standard 15mm wrench flats as well as 8mm hex broach - Black chrome hardware - Adjustable spring tension - 4° cleat float - 14.6° angle of release - Bushing/sealed bearing combination for low-maintenance durability - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch

The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install

The iSSi Road Carbon Pedals provide large platforms for excellent power transfer and stability. Bushing and sealed cartridge bearings add durability, while the Chromoly spindles resist corrosion for long life. - Simple installation with a 8mm hex key - Stainless Steel cleat plate provides a solid pedal interface - Adjustable spring tension - 7° float, 3-bolt split-cleat included - Cleat Interface: Look KeO - Material: Carbon - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Single-Sided Clipless - Spindle Material: Chromoly steel - Weight: 266 grams

- Guidering M to fit any 4x104mm BCD crank - Dual width "M" (narrow/wide) tooth profile engages the chain securely even at extreme angles - 7075-T6 aluminum construction optimized for all chainguide systems to prevent chain jamming -1mm swappable chainline

- Weight: 312g  - Body: CrMo Investment - Spindle: Cromoly - Bearings: 1 Cartridge/2DU  - Springs: SWP  - Cleat: XPEDO XPT (6° Float) 

X-Fusion's Manic dropper seatpost uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames and to increase usable travel. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Paddle shifter style remote with adjustable angle ball-joint handlebar clamp - Sealed cartridge internals for quick replacement - Double key-way design prevents lateral twisting - Low-profile head-seal and saddle clamp increase useable travel - Cable activated, hydraulic action, infinitely adjustable travel - Double bolt clamp with wide range of seat angle adjustment - Weight: 610g - Remote Position: Left or Right - Cable Routing: Internal - Insertion Depth: 285mm

The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics

Tub of 25 Grade 25, 3/16" loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25: - Dura Ace or Campy Record quality - 25 per tub

Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6x10 Flat Head Screw

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x8 Flat Head Screws - Specialized Part #9890-4226 Note: This hanger has been updated to match Specialized Part #9890-4226 and will accommodate 28-tooth and larger cassette cogs. Shifting with smaller cassette cog ranges will not be adversely affected.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt, (1) M4x8 Flat Head Screw

Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 300 — Ultegra level quality.

Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers

VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability. - 345 grams - 9/16" axles

TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks. • Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks • Crank bolts are included

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - 104mm BCD - Material: Aluminum

The Xpresso Free float cleats have been developed for the TIME Xpresso Road bike pedal range. They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. You can also adjust the Q-factor (by switching the cleats), in order to optimize performance following 3 points: security, ergonomics and performance. The Bi-material brings more durability when walking with the cleats. - Weight: 85g/pair

The Body Geometry Comfort Gel is ergonomically designed and scientifically tested to provide unmatched comfort and support while reducing pressure on soft tissue. - Plush foam combined with gel inserts delivers unmatched comfort. - Anatomically designed Body Geometry groove improves blood flow and comfort. - Vacuum formed construction creates a durable and waterproof saddle. - Level 5 padding: Ideal for commuting and casual riding - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.

Specialized's BG Contour Locking Grips are medically designed with an ergonomic shape that offers excellent support and protection, while the soft-density outers provide an outstanding grip and superb comfort. Available in two sizes for a perfect fit, the Contours also include locking clamps to keep them in place on your handlebars.

Specialized's BG Contour Locking Grips are medically designed with an ergonomic shape that offers excellent support and protection, while the soft-density outers provide an outstanding grip and superb comfort. Available in two sizes for a perfect fit, the Contours also include locking clamps to keep them in place on your handlebars.

Keep your ride upright and looking fly with Specialized's Center mount kickstand! - Made of durable aluminum.

2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount

Specialized's Command Post IRCC, offers Cruiser Control technology. With ten micro-adjust positions, you'll always be able to find just the right saddle height for descending like Gwin or climbing like Sauser. - Patented mechanical locking system with the addition of Cruiser Control Technology. - Cruiser Control technology features added positions in the cruiser control range. - Bonded lightweight aluminum micro-adjustable “alien” style head. - Dual-keyway system eliminates saddle wiggle. - Energized triple-lip wiper prevents contamination. - Durable zero-gap, dual-lip x-ring internal seal ensures long-term durability. - Ships with SRL and grip mounted lever.